Cenvalsa, distribuidor de componentes electrónicos, mecánicos e industriales
Este PDF será enviado a su cuenta de correo electrónico.
Por favor, asegúrese que el email es correcto:
Hard Metric AB / Conector Hard Metric Tipo AB - 2.00 mm
Hard Metric AB / Conector Hard Metric Tipo AB - 2.00 mm en CENVALSA.
Para más información sobre este producto llámanos al 917 21 60 10 o solicitando presupuesto aquí. Te responderemos antes de 24 horas. CENVALSA, compromiso de calidad.
0,00 €
Impuestos incluidos
Información adicional
Hard Metric AB / Conector Hard Metric Tipo AB - 2.00 mm
SERIE Hard Metric AB. 2.00 mm.
Características generales
- Available in type A, AB25, AB22, AB19, B25, B22, B19, C, L, M and N with full sets of keys
- Upper and lower shielding for the female connector
- Three different pin length in contact area and four different length in rear mating area for the male connector
- Full series are in press-fit termination
- Inverse mating configuration
- Minimun wiping length: 2,5 mm
- Meet standard coding system(MPC) according to IEC61076-4-101
- Two rows(z and f) of male connectors are for the shielding of female connectors
- Recomended plated through hole 0,60 +-0,05 mm for the press-fiting
- Ideal for digital high speed data applications with excelent parameters for impedance match, propagation delay, cross talk, reflection...
- End to end stackable
- Five signal rows plus outer rows for shieldings
- 2.00 mm Hard metric and DIN 41612 connectors can be used on the same PCB as both have the same mating distance
- Coding system prevents mix-up and wrong mating between male and female connectors
- Rear pin options (4 lengths) for through the backplane I/O applications
- High density capability
- Shield for EMI/RFI protection
- Expandablility for end user application
Características mecánicas
- Grid size: 2,00 mm
- Air and creepage distance: Male 0,80, Female 0,60 mm.
- Contact level: Level 1 (5,30 mm); Level 2 (6,80 mm); Level 3 (8,30 mm)
- Mating force for signal contact: 0,075 Kg f Maximum x contact
- Mating force for shield contatc: 0,1 Kg f Max. x contact
- Withdrawal force: 0,015 Kg f Min. per contact
- Termination: Press-fit
- Misalignment: Longitudinal +- 2,00 mm / Latitudinal: +- 2,50 mm
- Inclination: ± 2 degree
- PCB plated through hole: Drilled hole: 0,69 to 0,72 mm diameter / Cu: 25 μ min. / Sn: 5-15 μ min.
- Plated hole: 0,55 to 0,65 mm diameter
Materiales
- Insulator: Glass filled Polyester UL 94 V-0
- Contact: Phosphor bronze
- U/L file E149341, Electric rating: 250V, 2A
- Operating temperature. -55ºC to + 125ºC
- RoHS compliant
Características eléctricas
- Current rating: 1,5 A a 20 ºC. 1 A at 70º C
- Contact resistance: 0,20 miliohms max.
- Insulation resistance: 104 Megohms min.
- Test voltage: 750 Vrms
