Neousys Technology ofrece plataformas orientadas a aplicaciones. Los sistemas Neousys tienen un exclusivo diseño mecánico y un sistema de convección térmica que elimina eficazmente el calor de la CPU y otros componentes. Puede consultar aquí algunos de los productos de Neousys disponibles en CENVALSA
Hay 112 productos.
GMSL2 2D Camera - Camera support with pre-built BSP. Visión artificial industrial
‧ SONY IMX390 CMOS Sensor and GEO SEMI GW5200 ISP
‧ 1920x1080 uncompressed UYVY video output
‧ IP67 + IP69K waterproof on the lens side
‧ Enhanced edge focus and lens centering via 5-axis active adjustment
Camera support with pre-built BSP. Visión artificial industrial
‧ SONY IMX490 CMOS sensor and GEO SEMI GW5300 ISP
‧ 2880x1860 uncompressed UYVY video output
‧ IP67 + IP69K waterproof on the lens side
‧ Enhanced edge focus and lens centering via 5-axis active adjustment
IP67 + IP69K 3MP GMSL2 Camera with SONY ISX031 CMOS Sensor and ISP
Camera support with pre-built BSP. Visión artificial industrial
‧ SONY ISX031 CMOS sensor with in-built ISP
‧ 1920 x 1536 uncompressed UYVY video output
‧ IP67 + IP69K waterproof on the lens side
‧ Enhanced edge focus and lens centering via 5-axis active adjustment
- Five 10/100/1000 Mbps Gigabit Ethernet ports
- Supports IEEE 802.3at PoE+ PSE on port 2~5
- Up to 25.5 W power output on each port, total 80W power budget
- Dual power Input:
• PoE+ PD (Powered Device) mode via port 1
• 24/48 VDC input with power connector
- EMS level 3 protection for industrial environments
- Industrial-grade, -25°C to 70°C fanless operation
- IP50 (EDX-104J) housing
Computadora ligera para misiones con drones con tecnología NVIDIA® Orin™ NX.
124mm x 123mm x 29.8mm (Excluded enclosure) / 124mm x 123mm x 30.5mm (Included enclosure)
- Weighs only 297g for on-board installation
- Up to 100 TOPS GPU by Jetson Orin NX
- Supports multiple camera and sensor interfaces
· 2x GbE and 2x USB3 for RGB/ Infrared/ hyperspectral cameras and lidar/ radar
· 2x GMSL2 for HDR/ 3D cameras
- Built-in UART and CAN to interact with flight controller
- 1x M.2 2230 for storage and 4G/5G communication ready
- Supports 4S-14S drone battery pack
GT-92GC is a 19” rack-mount fanless GPU computer with Intel 14th/13th/12th-Gen CPUs, NVIDIA RTX 2000 ADA, and supports 8 GigE + 4 USB3 cameras for AI vision. PC industrial en CENVALSA.
- Intel® 14th/ 13th/ 12th-Gen LGA1700 processor (35W/65W)
- Fanless GPU computer with NVIDIA® RTX 2000 ADA
- 2U 19” chassis for rack-mount or wall-mount
- 8V to 48V wide-range DC input via M12 L-Coded connector
- 8x GbE PoE+, 1x GbE ports via M12 X-Coded connectors
- On-board isolated CAN bus for in-vehicle communication
- 1x M.2 2280 M key with PCIe-Gen 4x4 for NVMe storge
- 2x full-size mPCIe sockets with internal SIM sockets
- -25°C to 55°C wide-temperature fanless operation
EN50155 & EN45545 19" rack mount railway GPU computer including NVIDIA® 2000 ADA, supporting Intel® 14th/ 13th / 12thGen Core™ processor, 43V to 160V DC input with isolation. PC industrial en CENVALSA.
- Compliant with EN 50155 mandatory tests and EN 45545-2
- Intel® 14th/ 13th/ 12th-Gen LGA1700 processor (35W/65W)
- Fanless GPU computer with NVIDIA® RTX 2000 ADA
- 2U 19" chassis for rack-mount or wall-mount
- 43V to 160V wide-range DC input via M12 K-Coded connector
- 9x GbE ports via M12 X-Coded connectors
- 1x M.2 2280 M key with PCIe-Gen 4x4 for NVMe storge
- 2x full-size mPCIe sockets for MVB modules
- -40°C to 55°C wide-temperature fanless operation
ARM-based fanless in-vehicle communication industrial embedded IoT gateway with CAN bus.
Aplicación: Industrial / Transporte
Ref. Cenval: OEM-R09xx
Tipo: In-vehicle computing
TI Sitara™ AM3352 ARM-based Industrial IoT Gateway with Dual LAN and Pre-installed Debian.
Aplicación: Industrial / IOT
Ref. Cenval: OEM-R09xx
Tipo: Industrial IOT
TI Sitara™ AM3352 ARM-based Industrial IoT Gateway with Analog Inputs and Pre-installed Debian.
- Industrial grade ARM-based system with pre-installed Debian
- Built-in isolated analog input and DI/O channels
- Dual LAN and COM ports for expend
- 12 to 25V wide-range DC input and 802.3at PoE+ PD
- -25°C to 70°C wide temperature operation
- Qualified for AWS IoT Greengrass
Aplicación: Industrial / IOT
Tipo: Industrial IOT
4-CH/ 2-CH constant-current LED controller supporting 10A overdriving.
- Constant current LED lighting control
- 4-CH/ 2-CH LED outputs
· Up to 2A continuous output, max 180 W rated
· Up to 10A overdriving output, max 500 W peak
- 4-CH/ 2-CH isolated trigger inputs
- Support versatile operating modes: continuous, pulsed, overdriving and switched
- Support RS-232 and Ethernet interface
- 12 ~ 35V wide-range DC input
8-port RS-232/ 422/ 485 MezIO™ Module
‧ 4x RS-232/422/485 multi-mode ports
‧ 4x RS-232 ports (C180) or 4x RS-422/485 ports (C181)
‧ Up to 921.6 Kbps baud rate
‧ BIOS-configurable mode/termination settings
‧ Supports Windows 7/8/8.1/10
‧ SCSI-II 68-pin connector
Neousys MezIO® (interchangeable mezzanine I/O board) is an interface module designed for incorporating application-oriented I/O functions into an embedded system.
32/16-CH Isolated Digital I/O MezIO™ Module
‧ 16-CH isolated DI (D230) or 8-ch isolated DI (D220)
‧ 16-CH isolated DO (D230) or 8-ch isolated DO (D220)
‧ 2500 Vrms isolation voltage
‧ Up to 24V DC operation for DI and DO
‧ Up to 500 mA sink current on DO channel
‧ SCSI-II 68-pin connector
Neousys MezIO® (interchangeable mezzanine I/O board) is an interface module designed for incorporating application-oriented I/O functions into an embedded system.
4-Port GbE with 802.3at PoE+ MezIO™ Module
‧ 4x gigabit Ethernet ports
‧ Compliant with 802.3at PoE+ (MezIO-G4P)
‧ Supporting 9.5 KB jumbo frame
Neousys MezIO® (interchangeable mezzanine I/O board) is an interface module designed for incorporating application-oriented I/O functions into an embedded system.
2.5” SATA HDD/ SSD and mini-PCIe Accommodation MezIO™ Module
‧ Accommodates one 2.5” SATA HDD/ SSD
‧ One full-size mini-PCIe port with SIM socket
Neousys MezIO® (interchangeable mezzanine I/O board) is an interface module designed for incorporating application-oriented I/O functions into an embedded system.
4-Port USB 3.1 MezIO™ Module
‧ 4 x USB 3.1 ports by independent Renesas μPD720202 Host Controllers
‧ Up to 5 Gbps each port (MezIO-U4-50)
‧ Support up to 900 mA per port
Neousys MezIO® (interchangeable mezzanine I/O board) is an interface module designed for incorporating application-oriented I/O functions into an embedded system.
16-mode Ignition Power Control MezIO™ Module
‧ Ignition power control with 16 predefined on/ off delay modes
‧ Ultra-low 12 mA ignition-off standby power
‧ Advanced ignition control features
- Low-battery protection
- Guarded power-on/ power-off delay duration
- System hard-off
- BIOS POST check
‧ Supports 12V DC (small vehicle) and 24V DC (bus/ truck) vehicles
Neousys MezIO® (interchangeable mezzanine I/O board) is an interface module designed for incorporating application-oriented I/O functions into an embedded system.
NVIDIA® Jetson AGX Xavier™ Edge AI Fanless Computer Supporting 8x GMSL Automotive Cameras & 10G Ethernet
- Powered by NVIDIA® Jetson AGX Xavier™ SOM bundled with JetPack 4.4
- Support 8x GMSL automotive cameras via FAKRA Z connectors
- 1x 10GBASE-T 10G Ethernet port
- 1x M.2 2280 M key socket for NVMe SSD
- 1x mini PCIe socket for WIFI/ 4G module
- 1x isolated CAN bus port and 1x RS232 port with flow control
- 1x GPS PPS input, 3-CH isolated DI and 4-CH isolated DO
- 8V to 35V wide-range DC input with built-in ignition power control
NRU-120S is an ideal video inference fanless computer for autonomous machines, predictive maintenance, law enforcement, and smart city applications.
- Powered by NVIDIA® Jetson AGX Xavier™ SOM bundled with JetPack 4.4
- 4x IEEE 802.3at Gigabit PoE+ ports with screw-lock
- 2x front-accessible 2.5" HDD/SSD trays
- 1x M.2 2280 M key socket for NVMe SSD
- 1x mini PCIe socket for WIFI/4G module
- 1x isolated CAN bus port and 1x RS232 port with flow control
- 1x GPS PPS input, 3-CH isolated DI and 4-CH isolated DO
- 8V to 35V wide-range DC input with built-in ignition power control
The NRU-150-FT series is a compact, fanless edge AI computer incorporating Jetson Orin NX and independent 2.5GbE PoE+ or USB 3 camera connectivity. PC industrial en CENVALSA.
- Powered by NVIDIA® Jetson Orin™ NX bundled with JetPack 5.1
- Flattop heatsink design for conduction-cooled, in-cabinet deployment
- Up to 100 TOPS AI inference performance
- Full-bandwidth ports for camera connectivity:
- 4x 2.5GbE PoE+ ports (NRU-154PoE-FT)
- 6x USB 3.2 ports (NRU-156U3-FT)
- 1x RS-232 and 1x isolated RS-485
- 1x M.2 2242 M key NVMe for BSP and data storage
- -25°C to 60°C fanless operating temperature (with heat spreader attachment)
- No throttling at 60°C with Orin NX 20W TDP mode
- Powered by NVIDIA® Orin™ NX or Orin™ Nano SoM bundled with JetPack
- IP66 waterproof and dustproof
- -25°C to 70°C fanless operation (No throttling at 70°C with 20W TDP Mode)
- 6x GMSL2 automotive cameras via FAKRA Z connectors (NRU-161V-AWP)
- 4x PoE+ GbE via M12 X-coded connectors (NRU-162S-AWP)
- 1x CAN FD and 1x RS232 via M12 A-coded connectors
- 225 x 136 x 55 mm low-profile design
- 8V to 35V wide-range DC input with built-in ignition power control
- Powered by NVIDIA® Orin™ NX or Orin™ Nano SoM bundled with JetPack
- IP66 waterproof and dustproof
- 10.1″ touchscreen with 1920 x 1200 resolution, 1000 cd/m2 brightness, 1000:1 high contrast ratio
- -25°C to 60°C fanless operation (No throttling at 60°C with MAXN TDP Mode)
- 6x GMSL2 automotive cameras via FAKRA Z connectors (NRU-171V-PPC)
- 4x PoE+ GbE via M12 X-coded connectors (NRU-172S-PPC)
- 1x CAN FD and 1x RS232 via M12 A-coded connectors
- 8V to 35V wide-range DC input with built-in ignition power control
NRU-220S series is Neousys' response to edge AI performance demands in a compact form factor with fanless wide-temperature operation.
- Powered by NVIDIA® Jetson AGX Orin™ SoM bundled with JetPack 5.1.1
- Rugged -25°C to 70°C fanless operation (No throttling at 65°C with 64GB AGX Orin MAXN Mode)
- 2x 2.5 Gigabit Ethernet + 4x IEEE 802.3at Gigabit PoE+ ports
- 2x front-accessible 2.5” SDD trays
- 1x M.2 2280 M key socket for NVMe SSD
- 2x mini-PCIe sockets for WiFi/ GNSS/ NVMe/ CAN modules
- 1x 3042/ 3052 M.2 B key socket for 4G/5G mobile communication
- 1x isolated RS-485 and 2x RS232 ports
- 8V to 48V wide-range DC input with built-in ignition power control
- Powered by NVIDIA® Jetson AGX Orin™ SoM
- IP66 waterproof and dustproof
- -25°C to 70°C fanless operation
- Support 8x GMSL2 automotive cameras via FAKRA Z connectors (NRU-230V-AWP)
- 4x PoE+ GbE and 1x 10GBASE-T via M12 X-coded connectors
- 2x isolated CAN 2.0, 1x RS232, and 1x isolated RS485 via M12 A-coded connectors
- 1x system monitoring port by automotive-grade MCU
- 8V to 48V wide-range DC input with built-in ignition power control
Rugged NVIDIA® Jetson Orin™ NX/ Xavier™ NX GMSL2 Camera Sensor Hub for Autonomous Vehicles and Teleoperation.
- Powered by NVIDIA® Jetson Orin™ NX or Xavier™ NX SOM bundled with JetPack 5.1.1
- Rugged -25°C to 60°C fanless operation
- Support 4x GMSL2 automotive cameras via FAKRA Z connectors
- 1x 10GBASE-T 10Gb and 1x 1GBASE-T 1Gb Ethernet port
- 2x mini-PCIe sockets for WiFi/ GNSS/ NVMe/ CAN modules
- 1x M.2 3042/ 3052 B key socket for 4G/ 5G mobile communication
- 1x isolated CAN 2.0, 1x configurable RS232/ 422/ 485 port, and 1x GPS PPS input
- 8V to 35V wide-range DC input with built-in ignition power control
NRU-52S series is a rugged, wide temperature, fanless edge AI computer delivering up to 100 TOPS for AI-based video analytics applications requiring H.264/H.265 video decoding and real-time inference.
- Powered by NVIDIA® Jetson Orin™ NX or Xavier™ NX SOM bundled with JetPack 5.1.1
- Rugged -25°C to 70°C fanless operation
- 4x IEEE 802.3bt PoE++ GbE ports with screw-lock
- 2x mini-PCIe sockets for WIFI/GNSS/NVMe/CAN modules
- 1x 3042/3052 M.2 B key socket for 4G/5G mobile communication
- 1x hardware configurable RS232/RS422/RS485 port
- 8V to 35V wide-range DC input with built-in ignition power control
- MIL-STD-810G and EN 50155 certified
NSIO-LTE-7455 / Cat. 6 LTE Embedded Socket Modem
- Standard Mini-PCIe interface
- 4G LTE module
- Data rate: Cat. 6 (300 Mb/s DL, 50Mb/s UL)
- Rugged, wide operating temperature, -25°C to 60°C
- Designed for compatible Neousys platforms
Intel® 6th-Gen Skylake machine vision controller with vision-specific I/O, real-time control & GPU computing.
- Intel® 6th Gen Core™ i7/i5 65W/35W CPU, up to 32 GB DDR4
- Integrated vision-specific I/O
4-CH CC/CV lighting controller
4-CH camera trigger outputs
1-CH quadrature encoder input
8-CH isolated DI and 8-CH isolated DO
- Patented MCU-based, real-time I/O control by DTIO V2 and NuMCU
- Built-in camera interfaces
4-CH IEEE 802.3at Gigabit PoE+ ports
4-CH USB 3.1 Gen1 ports
- Supports NVIDIA 75W GPU for GPU-accelerated MV
-7002L
AMD Ryzen™ V1000 Ultra-compact Vision Controller with Vision-specific I/O and real-time control.
- AMD Ryzen™ Embedded V1807B quad-core 45W CPU
- Integrated vision-specific I/O
4-CH CC/ CV lighting controller
4-CH camera trigger outputs
1-CH quadrature encoder input
8-CH isolated DI and 8-CH isolated DO
- Patented MCU-based, real-time I/O control by DTIO V2* and NuMCU
- Built-in camera interfaces
Four Gigabit PoE+ ports with screw-lock
Four USB 3.1 Gen1 ports with screw-lock
- M.2 2280 M key NVMe (Gen3 x2) socket for fast storage access-7006LP Nuvo-7002L
Intel® 9th/ 8th-Gen Core™ i machine vision computer with vision-specific I/O, real-time controller and GPU-computing. PC industrial para visión artificial.
- Intel® 9th/ 8th-Gen Core™ i7/i5 LGA1151 socket-type CPU
- Integrated vision-specific I/O
4-CH CC/CV lighting controller
4-CH camera trigger outputs
1-CH quadrature encoder input
8-CH isolated DI and 8-CH isolated DO
- Patented MCU-based, real-time I/O control by DTIO V2 and NuMCU
- Built-in camera interfaces
4-CH IEEE 802.3at Gigabit PoE+ ports with screw-lockk
8-CH USB 3.1 ports with screw-lock
- Two x16 PCIe slots for NVIDIA 120W GPU and/or image capture card-7002L
Intel® 14th/ 13th/ 12th-Gen Core™ i9/ i7/ i5/ i3 Expansion Box-PC with up to 7 PCIe/ PCI Slots. PC industrial en CENVALSA.
- Supports Intel® 14th/ 13th/ 12th-Gen Core™ i9/ i7/ i5/ i3, Pentium® and Celeron® LGA 1700 CPU
- Compact footprint with up to seven expansion slots
· Two x16 PCIe, three x8 PCIe and two x4 PCIe slots (Nuvo-10007)
· Two x16 PCIe, two x8 PCIe and three PCI slots (Nuvo-10034)
· One x16 PCIe and two x8 PCIe slots (Nuvo-10003)
- 8x USB 3.2 Gen2 ports with screw-lock
- 1x 2.5G and 1GbE ports with screw-lock
- DP++ / HDMI 1.4b dual display outputs
- 2x 2.5" SATA HDD/ SSD accommodation support RAID control
- Supports single NVIDIA® GPU card with up to 115W TDP
Para visión artificial industrial, sistemas de vigilancia o inspección, automatización industrial, etc.
Industrial Edge AI Computer Supporting a 350W NVIDIA® RTX™ GPU and Intel® 13th/ 12th-Gen Core™ Processor with Three Additional PCIe Slots.
- Supports an NVIDIA® 350W GPU (Gen4 x16 PCIe)
- Dedicated GPU-locking bracket
- Intel® 13th/ 12th-Gen Core™ 35W/ 65W LGA1700 CPU
- Up to 64GB ECC/ non-ECC DDR5 4800 with Intel R680E chipset (2x SODIMM)
- Three x8 PCIe slots (Gen3 x4) for add-on cards
- 6x USB 3.2, 2x 2.5GbE, 1x GbE, and 1x optional 10GbE
- Two front-accessible tray storage options: 1x 2.5" SATA and 1x optional NVMe
- 8V to 48V wide-range DC input with ignition power control
- -25°C to 60°C wide temperature operation
