Hard Metric M / Conector Hard Metric Tipo M - 2.00 mm

Hard Metric M / Conector Hard Metric Tipo M - 2.00 mm

Hard Metric M / Conector Hard Metric Tipo M - 2.00 mm en CENVALSA.

Para más información sobre este producto llámanos al 917 21 60 10 o solicitando presupuesto aquí. Te responderemos antes de 24 horas. CENVALSA, compromiso de calidad.

0,00 €
Impuestos incluidos

Información adicional

Hard Metric M / Conector Hard Metric Tipo M - 2.00 mm

SERIE Hard Metric M. 2.00 mm.

Características generales

  • Available in type A, AB25, AB22, AB19, B25, B22, B19, C, L, M and N with full sets of keys
  • Upper and lower shielding for the female connector
  • Three different pin length in contact area and four different length in rear mating area for the male connector
  • Full series are in press-fit termination
  • Inverse mating configuration
  • Minimun wiping length: 2,5 mm
  • Meet standard coding system(MPC) according to IEC61076-4-101
  • Two rows(z and f) of male connectors are for the shielding of female connectors
  • Recomended plated through hole 0,60 +-0,05 mm for the press-fiting
  • Ideal for digital high speed data applications with excelent parameters for impedance match, propagation delay, cross talk, reflection...
  • End to end stackable
  • Five signal rows plus outer rows for shieldings
  • 2.00 mm Hard metric and DIN 41612 connectors can be used on the same PCB as both have the same mating distance
  • Coding system prevents mix-up and wrong mating between male and female connectors
  • Rear pin options (4 lengths) for through the backplane I/O applications
  • High density capability
  • Shield for EMI/RFI protection
  • Expandablility for end user application

Características mecánicas

  • Grid size: 2,00 mm
  • Air and creepage distance: Male 0,80, Female 0,60 mm.
  • Contact level: Level 1 (5,30 mm); Level 2 (6,80 mm); Level 3 (8,30 mm)
  • Mating force for signal contact: 0,075 Kg f Maximum x contact
  • Mating force for shield contatc: 0,1 Kg f Max. x contact
  • Withdrawal force: 0,015 Kg f Min. per contact
  • Termination: Press-fit
  • Misalignment: Longitudinal +- 2,00 mm / Latitudinal: +- 2,50 mm
  • Inclination: ± 2 degree
  • PCB plated through hole: Drilled hole: 0,69 to 0,72 mm diameter / Cu: 25 μ min. / Sn: 5-15 μ min.
  • Plated hole: 0,55 to 0,65 mm diameter

Materiales

  • Insulator: Glass filled Polyester UL 94 V-0
  • Contact: Phosphor bronze
  • U/L file E149341, Electric rating: 250V, 2A
  • Operating temperature. -55ºC to + 125ºC
  • RoHS compliant

Características eléctricas

  • Current rating: 1,5 A a 20 ºC. 1 A at 70º C
  • Contact resistance: 0,20 miliohms max.
  • Insulation resistance: 104 Megohms min.
  • Test voltage: 750 Vrms