Nuvo-2510VTC Series / Intel® Atom™ Bay Trail in-vehicle fanless embedded computer with 2x IEEE 802.3at PoE+ ports

Nuvo-2510VTC Series / Intel® Atom™ Bay Trail in-vehicle fanless embedded computer with 2x IEEE 802.3at PoE+ ports

Intel® Atom™ Bay Trail in-vehicle fanless embedded computer with 2x IEEE 802.3at PoE+ ports.

- Intel® Atom™ Bay Trail E3845 quad-core processor
- Dual mPCIe and USIM sockets for 3G, LTE, WLAN, BT or GPS modules
- Dual storage with 1x mSATA and 1x SATA
- Intelligent ignition power control
- 1x CAN bus port with compliance to CAN bus 2.0A and CAN 2.0B
- 8 to 35VDC wide-range DC input
- Operating temperature from -25° to 70°C
- Patented damping bracket for in-vehicle installation (R.O.C Patent No.M491752)
- E-Mark certificate (E13 No. 10R-0513905)

Aplicación: Industrial / Transporte
Ref. Cenval: OEM-C0904xxx
Tipo: In-vehicle computing

            

0,00 €
Impuestos incluidos

Nuvo-2510VTC is an in-vehicle fanless computer with Intel® Atom™ E3845 quad-core processor. Equipped with 2 IEEE 802.3at Gigabit Ethernet ports, Nuvo-2510VTC is capable of directly driving 25W GigE and PoE IP cameras with a single standard CAT-5e. Along with intelligent ignition power control and built-in CAN bus, Nuvo-2510VTC is ideal for light-weight mobile applications, such as mobile NVR and mobile APNR.

High Value Fanless Embedded Computer

Equipped with Intel® Bay Trail quad-core processor, Nuvo-2510VTC shows much higher performance than previous Atom D2550 computers. This provides adequate computing power for many light-weight applications with reasonable cost. With TDP, thermal design power, of the on-board processor is only 10W, as well as the wide range DC input, Nuvo-2510VTC is also good for battery-powered applications. Moreover, many value-added features, such as shock-absorbing mounting, ignition power control, wide operating temperature, wide-range DC input, are designed in. Whether for in-vehicle or general purpose applications, Nuvo-2510VTC is really a high value industrial fanless embedded computer.

2x IEEE 802.3at PoE+ Ports

Nuvo-2510VTC integrates 2 Gigabit PoE+ PSE ports compliant with IEEE 802.3at standard. Each port can deliver power up to 25.5W and simultaneously transfer data up to 1000 Mb/s over a single CAT-5e/CAT-6 cable. The built-in PoE+ ports support per-port on/off. The per-port on/off feature allows you to reset the connected PoE PD devices. The highly integrated design, moreover, allows Nuvo-2510VTC to effectively manage the heat which PoE circuit generates and consequently makes Nuvo-2510VTC a very stable fanless embedded computer equipped with PoE+ PSE ports.

Built-in CAN bus Port

CAN bus is a vehicle bus standard allowing the in-vehicle devices to communicate with individual ECUs or each other without a host, and is widely used in different vehicles nowadays. Nuvo-2510VTC provides built-in CAN bus port. The built-in CAN bus supports the bit rate up to 1Mbps and both CAN2.0A and CAN2.0B. These two frame formats forms the Data Link Layer and Physical Layer of many CAN-based HLP, Higher Layer Protocols, such as ISO TP, J1939 and OBD. The built-in CAN bus is provided with SDK facilitating sending and receiving CAN bus messages with configurable CAN bus identifier. By assigning different identifier and data byte, Nuvo-2510VTC is possible to handle different CAN-base HLPs.

Nuvo-2510VTC Series


CARACTERÍSTICAS

System core

Processor Intel® Atom™ Bay Trail E3845 Quad-core Processor (1.91 GHz, 2M cache)
Graphics Integrated Intel® HD Graphics
Memory Up to 8GB DDR3L 1333MHz SDRAM (single SO-DIMM slot)

Front Panel I/O Interface

PoE Port
2x IEEE 802.3at (25.5W) Gigabit Ethernet ports by Intel I210
USB 1x USB 3.1 Gen1 port and 3x USB 2.0 ports
Video Port
1x DB-15 connector for analog RGB,supporting 2560 x 1600 resolution
Serial Port 2x software-programmable RS-232/422/485
(COM1 & COM2)
Audio 1x 3.5 mm jack for mic-in and speaker-out

Back Panel I/O Interfac

Video Port
1x DVI-I connector with DVI-D output, supporting 2560 x 1600 resolution
Series Port 2x RS-232 (COM3 & COM4)
Audio 1x Mic-in, 1x Speaker-out
Can BUS 1x DB-9 connector for CAN bus communications

Storage Interface

SATA HDD 1x Internal SATA port for 2.5” HDD/SSD installation
mSATA
1x internal half-sized mSATA (SATA + USB)

Expansion Bus

Mini-PCIe 1x full-sized mini PCI Express socket with USIM socket (PCIe + USB)
1x full-sized mini PCI Express socket with external USIM socket (USB)

Power Supply

DC Input 1x 3-pin pluggable terminal block for ignition signal and 8V to 35V DC input

Mechanical

Dimension 205 mm (W) x 146 mm (D) x 44 mm (H)
Weight 1.9 kg (incl. CPU, memory and HDD)
Mounting Patented shock-absorbing wall-mounting (standard) or DIN-Rail mounting (optional)

Environmental

Operating temperature 25°C ~ 70°C with SSD, 100% CPU loading */**
-10°C ~ 50°C with HDD, 100% CPU loading */**
Storage temperature -40°C ~85°C
Humidity 10%~90%, non-condensing
Vibration Operating, 5 Grms, 5-500 Hz, 3 Axes(w/ SSD, according to IEC60068-2-64)
Shock Operating, 50 Grms, Half-sine 11 ms Duration (w/ SSD, according to IEC60068-2-27)
EMC E-Mark for vehicle applications CE/ FCC Class A, according to EN 55022 & EN 55024

* The 100% CPU loading is applied using Passmark® BurnInTest™ v7.0. For detail testing criteria, please contact Neousys Technology
** For sub-zero operating temperature, a wide temperature HDD drive or Solid State Disk (SSD) is required

Para más información sobre este producto llámenos al 917 21 60 10 o solicite presupuesto aquí. Le responderemos antes de 24 horas. CENVALSA, compromiso de calidad.

FABRICANTE: